Hole- and Seam Sealer 12g (ca. 1/2 oz.), 2-Pack
.png "fishingglue.de")
2-Pack Hole- and Seam Sealer 12g (ca. 1/2 oz.).
Hole- and Seam Sealer 12g (ca. 1/2 oz.)Here in the cost-optimized 2-Pack. For example for collecting orderers.
The following description always refers to 1 pack!
The HOLE- & SEAM SEALER 12g from fishingglue.de is a Liquid PVC / Liquid Patch for quickly sealing seams and small holes up to max. 3mm* in items made of soft PVC, artificial leather and PU (polyurethane) as well as for fabric and fabric surfaces made of vinyl, polyester and nylon. For example for films, tarpaulins, umbrellas, tents, shoes, rainwear, etc. Our HOLE & SEAM SEALER is very economical, milky-transparent after drying, UV-resistant, does not become brittle and adheres well. Thanks to the ergonomic dosing tip, you can apply the HOLE & SEAM SEALER well and dose it easily.
* Please use our PVC and PU repair kits for holes larger than 3 mm in diameter.
Instructions for use
Clean the area to be repaired or the seam to be sealed from dirt and dry (also free of grease and silicone!). Then apply the HOLE & SEAM SEALER generously to the damaged areas or the seam and leave to dry for at least 30 minutes. Repeat the order if necessary.
The drying time for highly stressed parts such as sleeping pads, air mattresses, etc. is at least 3 hours!
If you are not sure whether the defective article/the defective material can be repaired with the HOLE & SEAM SEALER, you should test the application first on a non-visible area!
Avoid direct sunlight and draughts for every repair/application! Temperatures below 5°C can negatively affect the repair result.
Specification
Form of delivery
in a sturdy resealable plastic box:
- 1 tube HOLE- & SEAM SEALER 12 g
- Instructions for use on the bottom of the pack
Storage / Shelf Life
The warehousing and application- temperature should ideally be 10 - 25°C. Storage at temperatures below 5°C the Hole- and Seam Sealer may crystallize and is characterized possibly temporarily unusable. When heated to room temperature crystallized products they are again fully usable.
Unopened the Hole- and Seam Sealer is several years, if stored under recommended storage temperature.
Hole- and Seam Sealer 12g (ca. 1/2 oz.)Here in the cost-optimized 2-Pack. For example for collecting orderers.
The following description always refers to 1 pack!
The HOLE- & SEAM SEALER 12g from fishingglue.de is a Liquid PVC / Liquid Patch for quickly sealing seams and small holes up to max. 3mm* in items made of soft PVC, artificial leather and PU (polyurethane) as well as for fabric and fabric surfaces made of vinyl, polyester and nylon. For example for films, tarpaulins, umbrellas, tents, shoes, rainwear, etc. Our HOLE & SEAM SEALER is very economical, milky-transparent after drying, UV-resistant, does not become brittle and adheres well. Thanks to the ergonomic dosing tip, you can apply the HOLE & SEAM SEALER well and dose it easily.
* Please use our PVC and PU repair kits for holes larger than 3 mm in diameter.
Instructions for use
Clean the area to be repaired or the seam to be sealed from dirt and dry (also free of grease and silicone!). Then apply the HOLE & SEAM SEALER generously to the damaged areas or the seam and leave to dry for at least 30 minutes. Repeat the order if necessary.
The drying time for highly stressed parts such as sleeping pads, air mattresses, etc. is at least 3 hours!
If you are not sure whether the defective article/the defective material can be repaired with the HOLE & SEAM SEALER, you should test the application first on a non-visible area!
Avoid direct sunlight and draughts for every repair/application! Temperatures below 5°C can negatively affect the repair result.
Specification
- Special solution for sealing seams and small holes in articles made of soft PVC, imitation leather and PU (polyurethane) as well as for fabrics and fabric surfaces made of vinyl, polyester and nylon.
- Milky-transparent after drying, UV-resistant and flexible
- Dimensions approx. 120 x 40 x 22mm (L x W x H)
- Total item weight: approx. 35 g
- Milky-transparent after drying, UV-resistant and flexible
- Dimensions approx. 120 x 40 x 22mm (L x W x H)
- Total item weight: approx. 35 g
Form of delivery
in a sturdy resealable plastic box:
- 1 tube HOLE- & SEAM SEALER 12 g
- Instructions for use on the bottom of the pack
Storage / Shelf Life
The warehousing and application- temperature should ideally be 10 - 25°C. Storage at temperatures below 5°C the Hole- and Seam Sealer may crystallize and is characterized possibly temporarily unusable. When heated to room temperature crystallized products they are again fully usable.
Unopened the Hole- and Seam Sealer is several years, if stored under recommended storage temperature.
Hazards for the Hole- and Seam- Sealer:
Danger
Hazardous components which must be listed on the label: Butanone
Hazard statements: Highly flammable liquid and vapour. Causes serious eye irritation. May cause drowsiness or dizziness.
Precautionary statements: Keep out of reach of children. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Keep container tightly closed. Wear protective gloves/protective clothing/eye protection/face protection. IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Store in a well-ventilated place. Keep container tightly closed. Dispose of contents/container to in accordance with local and national regulations.
Special labelling of certain mixtures: Repeated exposure may cause skin dryness or cracking.
Other hazards: Vapours may form explosive mixture with air.
Safety data sheet
Danger
Hazardous components which must be listed on the label: Butanone
Hazard statements: Highly flammable liquid and vapour. Causes serious eye irritation. May cause drowsiness or dizziness.
Precautionary statements: Keep out of reach of children. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Keep container tightly closed. Wear protective gloves/protective clothing/eye protection/face protection. IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Store in a well-ventilated place. Keep container tightly closed. Dispose of contents/container to in accordance with local and national regulations.
Special labelling of certain mixtures: Repeated exposure may cause skin dryness or cracking.
Other hazards: Vapours may form explosive mixture with air.
Safety data sheet
Hersteller/EU Verantwortliche Person/Produktdokumente
Hersteller:
Unternehmensname
Hans-Günther Winkler
Adresse
Ahornweg 11, 85586 Poing, Bayern, DE
E-Mail
info@fishingglue.de
Telefon
081212279007
EU Verantwortliche Person:
Unternehmensname
Hans-Günther Winkler
Adresse
Ahornweg 11, 85586 Poing, Bayern, DE
E-Mail
info@fishingglue.de
Telefon
081212279007
Produktdokumente:
Datenblatt LOCH- & NAHT-DICHTER
Sicherheitsdatenblatt LOCH- & NAHT-DICHTER
Hersteller:
Unternehmensname
Hans-Günther Winkler
Adresse
Ahornweg 11, 85586 Poing, Bayern, DE
info@fishingglue.de
Telefon
081212279007
EU Verantwortliche Person:
Unternehmensname
Hans-Günther Winkler
Adresse
Ahornweg 11, 85586 Poing, Bayern, DE
info@fishingglue.de
Telefon
081212279007
Produktdokumente:
Datenblatt LOCH- & NAHT-DICHTER
Sicherheitsdatenblatt LOCH- & NAHT-DICHTER
