FISHINGGLUE glass rattles small (4 mm)
Our smallest adhesive glass rattles with a diameter of approx. 4 mm and the lowest weight for small and very small soft baits. Due to the plastic coating, the glass rattles offered here are not suitable for insertion into soft bait! Only for direct gluing with SOFT BAIT GLUE to / on almost all soft baits! With the Soft Bait Glue, the glass rattles with their special coating can be glued very easily and permanently to almost all soft baits. Also on soft baits with a very high proportion of softeners as well as salted and flavored baits!
Danger! Our Soft Bait Glue and the coating of the glass rattle are not suitable for all softener-free soft baits from Moby made from Non Toxic Material, Z-Man soft baits from ElaZtech or baits made from similar material. Also not suitable for all soft baits from the company PROFIBLINKER.
Instructions for gluing to the soft bait
- Apply some SOFT BAIT GLUE to the soft bait and massage in with the dosing tip. Do not allow the glue to dry out!
- Place the glass rattle on the still sticky place, press it and fix it to the soft bait.
- Allow the fixed glass rattle to dry for at least 10 minutes and then apply a little SOFT BAIT GLUE to the transition from the glass rattle to the soft bait to complete the gluing.
- Allow the bond to set for at least 30 minutes.
Avoid direct sunlight and drafts with every repair / gluing!
Temperatures below 5°C can negatively affect the bond!
Specification
- Dimensions of single rattle: approx. 4 x 15 mm
- Dimensions of the entire article (including packaging) approx. 120 x 70 x 10 mm (L x W x H)
- Total weight of the article: approx. 30 g
Delivery form
- 10 pieces FISHINGGLUE glass rattles small (4 mm)
- 1 detailed instructions for gluing to soft baits on the packaging
Storage / shelf life
The storage and bonding temperature should ideally be 10 - 25 ° C. If the recommended storage temperature is observed, the FISHINGGLUE glass rattles can be stored for several years.
