PVC-& PU-REPAIR KIT PLUS (inkl. Hole- and Seam Sealer 12g)
The PLUS repair kit for PVC, Fabric and PU (Polyurethan) fishing tackle and outdoor tackle for example for PVC- boots, PVC-wading boots, wading trousers, PVC-boats, tents, screens, surf sails, rain clothing, boat seats and many other PVC, imitation leather and PU-articles.
Scope of supply
- 2 tube PVC- adhesive 6 g
- 1 transparent patch 300 x 75 mm
- 2 transparent round patches in the diameter 45 mm
- 2 transparent patches 75 x 40 mm
- 2 sandpaper
- 3 brush and
- Operating Instruction and
- 1 Tube Hole- and Seam Sealer 12g
Dimensions (L x B x H)
approx. 118 x 70 x 22 mm
wight: 85 g
Operating Instruction PVC- and PU Repair Material
Application with articles from PVC, with PVC surface, PU and imitation leather
The place with the sandpaper, which can be repaired, easily sharpen (somewhat more largely than the patch). The adhesive on the polished place and on the patches give and with the brush evenly thinly distribute. Adhesive 1- max. 2 minutes to influence leave. Beginning outward and at least 5 minutes present the patch and press in slightly firmly of the center under pressure left (e.g. with the hand). The stuck together place is then easily loadable. The repair is fully loadable after approximately 2 - 3 hours.
Application with articles from fabric and with fabric surface
The place with the sandpaper which can be repaired, easily sharpen (somewhat more largely than the patch). On the polished place a sufficient quantity adhesive gives and with the brush distributes, to rub in and approx. 20 - 30 minutes influence leaves. Then the 2nd adhesive spreader on the 1st spreader and the patches lie on and with the brush evenly distribute. The adhesive 1- max. 2 minutes to influence leave. Then beginning outward and mind.5 present the patch and press in slightly firmly of the center minutes under pressure left (e.g. with the hand). The stuck together place is then easily loadable. The repair is fully loadable after approximately 2 - 3 hours.
Operating Instruction Hole- and Seam Sealer
The hole and seam poet of fishingglue.de are particularly well suitable around small holes* in screens, tents, tarpaulins, to seal rain clothing as well as seams of all kinds. In addition those place which can be repaired and/or the seam which can be sealed clean and dry (fat and silicone-freely). Then on the hole or the seam the hole and seam poet generously lay on. Dry let and if necessary repeat.
The bearing and the Waring-temperature should be 10-25°C. Below 5°C can be contained in the package and adhesive partially crystallize thicken. When heated to room temperature, however, crystallized products are re-usable.