_2022.jpg "5-Pack SVS-VULC 5 g / 7 ml + 5 brushes 68 mm")
.jpg "5-Pack SVS-VULC 5 g / 7 ml + 5 brushes 68 mm")
_2022.jpg "Preview: 5-Pack SVS-VULC 5 g / 7 ml + 5 brushes 68 mm")
.jpg "Preview: 5-Pack SVS-VULC 5 g / 7 ml + 5 brushes 68 mm")
5-Pack SVS-VULC 5 g / 7 ml + 5 brushes 68 mm
_2022.jpg "5-Pack SVS-VULC 5 g / 7 ml + 5 brushes 68 mm")
.jpg "5-Pack SVS-VULC 5 g / 7 ml + 5 brushes 68 mm")
.png "fishingglue.de")
5- Pack SVS-VULC (rubber /vulcanizing solution) 5 g / 7 ml + 5 brushes 68 mm long
For quick and easy repair of rubber and neoprene items. For example, you can reliably mend boots, waders, rubber dinghies and surfing clothing. Also excellent for repairing defective bicycle tubes. This item contains 5 matching brushes to easily spread the vulcanizing solution. For safe and organized storage, the 5 tubes of vulcanizing solution and 5 brushes are packed in a sturdy, resealable plastic box.
Instructions for use
Rubber & vehicle hose repair (we recommend REMA TIP TOP patches)
Slightly roughen the area to be repaired with the buffing paper (slightly larger than the patch). Apply a thin layer of the vulcanizing solution to the roughened surface, massage in with a brush and leave on for at least 5 minutes. Remove the aluminum foil from the repair patch. Lay the patch on and press firmly from the center outwards. Let the bond rest for at least 30 minutes. The bonded area can then be easily loaded. The repair can be fully loaded after approx. 2 - 3 hours.
Neoprene repair (we recommend REMA TIP TOP patches)
Apply a sufficient amount of vulcanizing solution to the area to be repaired and massage in with a brush (slightly larger than the patch). Allow the vulcanizing solution to take effect for at least 5 minutes. Then apply a 2nd coat of vulcanizing solution to the 1st coat and massage in with the brush, but only allow it to take effect for a short time! Remove the aluminum foil from the repair patch. Place the repair patch and press firmly from the center outwards. Let the bond rest for at least 60 minutes. The bonded area can then be easily loaded. The repair can be fully loaded after approx. 2 - 3 hours.
Avoid direct sunlight and draughts for every repair/bonding!Temperatures below 5°C can negatively affect the repair result.
Specification
- REMA TIP TOP vulcanizing liquid for repairing or gluing articles made of rubber and neoprene.
- Dimensions of single tube approx. 75 x 20 mm (L x W)
- Weight of single tube approx. 5 g/ 7 ml
- Total weight about 75 g
- Dimensions including packaging approx.: 118 x 70 x 22 mm
Form of delivery
in a sturdy resealable plastic box:
- 5 tubes of rubber solution/ vulcanizing solution with 5 g/ 7 ml content
- 5 pieces round brushes 68 mm long
- 1 detailed product description with instructions for use
Storage/ shelf life
The storage and application temperature is ideally between 10 - 25°C. If the recommended storage temperature is observed, the REMA TIP TOP SVS-VULC (RUBBER SOLUTION/ VULCANIZING SOLUTION) can be stored for many years.
For quick and easy repair of rubber and neoprene items. For example, you can reliably mend boots, waders, rubber dinghies and surfing clothing. Also excellent for repairing defective bicycle tubes. This item contains 5 matching brushes to easily spread the vulcanizing solution. For safe and organized storage, the 5 tubes of vulcanizing solution and 5 brushes are packed in a sturdy, resealable plastic box.
Instructions for use
Rubber & vehicle hose repair (we recommend REMA TIP TOP patches)
Slightly roughen the area to be repaired with the buffing paper (slightly larger than the patch). Apply a thin layer of the vulcanizing solution to the roughened surface, massage in with a brush and leave on for at least 5 minutes. Remove the aluminum foil from the repair patch. Lay the patch on and press firmly from the center outwards. Let the bond rest for at least 30 minutes. The bonded area can then be easily loaded. The repair can be fully loaded after approx. 2 - 3 hours.
Neoprene repair (we recommend REMA TIP TOP patches)
Apply a sufficient amount of vulcanizing solution to the area to be repaired and massage in with a brush (slightly larger than the patch). Allow the vulcanizing solution to take effect for at least 5 minutes. Then apply a 2nd coat of vulcanizing solution to the 1st coat and massage in with the brush, but only allow it to take effect for a short time! Remove the aluminum foil from the repair patch. Place the repair patch and press firmly from the center outwards. Let the bond rest for at least 60 minutes. The bonded area can then be easily loaded. The repair can be fully loaded after approx. 2 - 3 hours.
Avoid direct sunlight and draughts for every repair/bonding!Temperatures below 5°C can negatively affect the repair result.
Specification
- REMA TIP TOP vulcanizing liquid for repairing or gluing articles made of rubber and neoprene.
- Dimensions of single tube approx. 75 x 20 mm (L x W)
- Weight of single tube approx. 5 g/ 7 ml
- Total weight about 75 g
- Dimensions including packaging approx.: 118 x 70 x 22 mm
Form of delivery
in a sturdy resealable plastic box:
- 5 tubes of rubber solution/ vulcanizing solution with 5 g/ 7 ml content
- 5 pieces round brushes 68 mm long
- 1 detailed product description with instructions for use
Storage/ shelf life
The storage and application temperature is ideally between 10 - 25°C. If the recommended storage temperature is observed, the REMA TIP TOP SVS-VULC (RUBBER SOLUTION/ VULCANIZING SOLUTION) can be stored for many years.
Hazards for the SVS-VULC
Danger
Hazardous components which must be listed on the label: Naphtha (petroleum)
Hazard statements: Highly flammable liquid and vapour. Causes skin irritation. May cause drowsiness or dizziness. Toxic to aquatic life with long lasting effects.
Precautionary statements: Keep out of reach of children. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Wear protective gloves/protective clothing/eye protection/face protection. IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Call a POISON CENTER or doctor/physician if you feel unwell. Avoid release to the environment. Dispose of contents/container to waste treatment facility in accordance with local and national regulations.
Other hazards: Vapours may form explosive mixture with air.
Safety data sheet SVS-VULC
Hersteller/EU Verantwortliche Person/Produktdokumente
Hersteller:
Unternehmensname
Hans-Günther Winkler
Adresse
Ahornweg 11, 85586 Poing, Bayern, DE
E-Mail
info@fishingglue.de
Telefon
081212279007
EU Verantwortliche Person:
Unternehmensname
Hans-Günther Winkler
Adresse
Ahornweg 11, 85586 Poing, Bayern, DE
E-Mail
info@fishingglue.de
Telefon
081212279007
Produktdokumente:
Anleitung SVS VULC
Sicherheitsdatenblatt SVS VULC
Hersteller:
Unternehmensname
Hans-Günther Winkler
Adresse
Ahornweg 11, 85586 Poing, Bayern, DE
info@fishingglue.de
Telefon
081212279007
EU Verantwortliche Person:
Unternehmensname
Hans-Günther Winkler
Adresse
Ahornweg 11, 85586 Poing, Bayern, DE
info@fishingglue.de
Telefon
081212279007
Produktdokumente:
Anleitung SVS VULC
Sicherheitsdatenblatt SVS VULC
_01.jpg "Preview: 10 Tube Patches No.7 (74 X 37 mm) Red Edge")
_02.jpg "Preview: 10 Tube Patches No.7 (74 X 37 mm) Red Edge")
_01.jpg "Preview: 10 Tube Patches No.1 (Ø 35 mm) Red Edge")
_02.jpg "Preview: 10 Tube Patches No.1 (Ø 35 mm) Red Edge")
_2022.jpg "Preview: 10- Pack SVS-VULC 5 g / 7 ml + 10 brushes 68 mm")
.jpg "Preview: 10- Pack SVS-VULC 5 g / 7 ml + 10 brushes 68 mm")
.jpg "Preview: 10- Pack SVS-VULC 5 g / 7 ml + 10 brushes 68 mm")