FISHINGGLUE-Glass Rattles large (6mm) + Soft Bait Glue 12g (ca. 1/2 oz.)
FISHINGGLUE glass rattles large (6 mm) + Soft Bait Glue 12g
Our large and loudest adhesive glass rattles with a diameter of approx. 6 mm. Here together in an inexpensive set together with a pack a 12g tube of Gummifischkleber (hereinafter referred to as Soft Bait Glue).Due to the plastic coating, the glass rattles offered here are not suitable for insertion into soft bait! Only for direct gluing with SOFT BAIT GLUE to / on almost all soft baits! With the Soft Bait Glue, the glass rattles with their special coating can be glued very easily and permanently to almost all soft baits. Also on soft baits with a very high proportion of softeners as well as salted and flavored baits!
Danger! Our Soft Bait Glue and the coating of the glass rattle are not suitable for all softener-free soft baits from Moby made from Non Toxic Material, Z-Man soft baits from ElaZtech or baits made from similar material. Also not suitable for all soft baits from the company PROFIBLINKER.
Instructions for gluing to the soft bait
- Apply some SOFT BAIT GLUE to the soft bait and massage in with the dosing tip. Do not allow the glue to dry out!
- Place the glass rattle on the still sticky place, press it and fix it to the soft bait.
- Allow the fixed glass rattle to dry for at least 10 minutes and then apply a little SOFT BAIT GLUE to the transition from the glass rattle to the soft bait to complete the gluing.
- Allow the bond to set for at least 30 minutes.
Avoid direct sunlight and drafts with every repair / gluing!
Temperatures below 5 ° C can negatively affect the bond!
Specification
glass rattles large 6 mm
- Dimensions of single rattle: approx. 6 x 16 mm
- Dimensions article approx. 120 x 70 x 10 mm (L x W x H)
- Total weight of the article: approx. 15 g
Gummifischkleber 12g
- Special adhesive for repairing / gluing soft baits
- Dimensions article approx. 120 x 40 x 22 mm (L x W x H)
- Total weight of the article: approx. 35 g
Form of delivery
glass rattles large 6 mm
- 10 pieces FISHINGGLUE glass rattles large (6 mm)
- 1 detailed instructions for gluing to soft baits on the packaging
Gummifischkleber 12g
- 1 tube SOFT BAIT GLUE with 12g content in a sturdy reusable plastic box.
Storage / shelf life
Our large and loudest adhesive glass rattles with a diameter of approx. 6 mm. Here together in an inexpensive set together with a pack a 12g tube of Gummifischkleber (hereinafter referred to as Soft Bait Glue).Due to the plastic coating, the glass rattles offered here are not suitable for insertion into soft bait! Only for direct gluing with SOFT BAIT GLUE to / on almost all soft baits! With the Soft Bait Glue, the glass rattles with their special coating can be glued very easily and permanently to almost all soft baits. Also on soft baits with a very high proportion of softeners as well as salted and flavored baits!
Danger! Our Soft Bait Glue and the coating of the glass rattle are not suitable for all softener-free soft baits from Moby made from Non Toxic Material, Z-Man soft baits from ElaZtech or baits made from similar material. Also not suitable for all soft baits from the company PROFIBLINKER.
Instructions for gluing to the soft bait
- Apply some SOFT BAIT GLUE to the soft bait and massage in with the dosing tip. Do not allow the glue to dry out!
- Place the glass rattle on the still sticky place, press it and fix it to the soft bait.
- Allow the fixed glass rattle to dry for at least 10 minutes and then apply a little SOFT BAIT GLUE to the transition from the glass rattle to the soft bait to complete the gluing.
- Allow the bond to set for at least 30 minutes.
Avoid direct sunlight and drafts with every repair / gluing!
Temperatures below 5 ° C can negatively affect the bond!
Specification
glass rattles large 6 mm
- Dimensions of single rattle: approx. 6 x 16 mm
- Dimensions article approx. 120 x 70 x 10 mm (L x W x H)
- Total weight of the article: approx. 15 g
Gummifischkleber 12g
- Special adhesive for repairing / gluing soft baits
- Dimensions article approx. 120 x 40 x 22 mm (L x W x H)
- Total weight of the article: approx. 35 g
Form of delivery
glass rattles large 6 mm
- 10 pieces FISHINGGLUE glass rattles large (6 mm)
- 1 detailed instructions for gluing to soft baits on the packaging
Gummifischkleber 12g
- 1 tube SOFT BAIT GLUE with 12g content in a sturdy reusable plastic box.
Storage / shelf life
The storage and application temperature should ideally be 10 - 25°C. The Soft Bait Glue contained in the package can crystallize out when stored below 5°C and may therefore not be usable at times. When heated to room temperature, however, crystallized products can be used again without restrictions. If the recommended storage temperature is observed, the fishingglue glass rattles can be stored for several years.
Hazards for the Soft Bait Glue:
Danger
Hazardous components which must be listed on the label: Butanone
Hazard statements: Highly flammable liquid and vapour. Causes serious eye irritation. May cause drowsiness or dizziness.
Precautionary statements: Keep out of reach of children. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Keep container tightly closed. Wear protective gloves/protective clothing/eye protection/face protection. IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Store in a well-ventilated place. Keep container tightly closed. Dispose of contents/container to in accordance with local and national regulations.
Special labelling of certain mixtures: Repeated exposure may cause skin dryness or cracking.
Other hazards: Vapours may form explosive mixture with air.
Safety data sheet
Danger
Hazardous components which must be listed on the label: Butanone
Hazard statements: Highly flammable liquid and vapour. Causes serious eye irritation. May cause drowsiness or dizziness.
Precautionary statements: Keep out of reach of children. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Keep container tightly closed. Wear protective gloves/protective clothing/eye protection/face protection. IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Store in a well-ventilated place. Keep container tightly closed. Dispose of contents/container to in accordance with local and national regulations.
Special labelling of certain mixtures: Repeated exposure may cause skin dryness or cracking.
Other hazards: Vapours may form explosive mixture with air.
Safety data sheet
