Gummifischkleber 12g (Soft Bait Glue 12g ca. 1/2 oz.), 16-Displaypack
.png "fishingglue.de")
Gummifischkleber 12g (Soft Bait Glue 12g ca. 1/2 oz.), 16-Displaypack
The GUMMIFISCHKLEBER from fishingglue.de (hereinafter referred to as Soft Bait Glue) is the adhesive for youre Soft lures. He is a special colorless / clear adhesive for almost all the soft baits *. The splice is soft and flexible after drying and does not harden! Our Soft Bait Glue does not stick to the skin (it is not superglue!) and is easy to insert into the holes, cracks and cuts of the soft bait with the ergonomic dosing tip. The glue is very economical. Sticking salted and flavored rubber baits is also perfect.
Furthermore, the Soft Bait Glue is absolutely perfect for gluing our fishingglue STINGER MAGNETS and fishingglue GLASS RATTLES to most rubber lures*. The Soft Bai Glue glues the fishingglue STINGER MAGNETS or the fishingglue GLASS RATTLES together with the rubber lure extremely firmly.
* Not suitable for all softener-free soft baits from Moby made from Non Toxic Material, Z-Man soft baits from ElaZtech or baits made from similar material. Also not suitable for all rubber baits from the company "PROFIBLINKER" and "LIEBLINGSKÖDER".
application
Clean the place to be allocated necessary back up and dry. provide a sufficient amount of adhesive on both sides and completely to the adherend-sectional area, in the crack or the other to be repaired, allow to dry for 5 - 10 seconds and then squeeze firmly. Now even smaller corrections are possible. Remove the possibly excess / leaving adhesive residue immediately coarsely. The soft bait store and allow to dry for at least 10 minutes to rest. Then, the bonded body is normal to heavy load. Basically, the longer the drying time more stable connection. Therefore, our recommendation is subject to high loads and severe adhesions / large soft baits at least 1 hour (z. B.> 16 cm) to maintain. When adhesions in the area of the jig head or the hook channel remove the jig head before bonding and at least 1 hour (preferably longer) wait until the use of the soft bait.
Avoid at every repair / bonding direct sunlight and drafts! Temperatures below 5 ° C can adversely affect the repair result.
Specification
- Special glue for repairing / for bonding soft plastic baits
- Dimensions 170 x 130 x 90 mm (L x B x H)
- Weight of the article total: approx 720 g
Made in Germany!
Packaging
- 16 packs of Gummifischkleber 12g item no. 999997 in a display box.
Storage / Shelf Life
The warehousing and application- temperature should ideally be 10 - 25°C. Storage at temperatures below 5°C the Soft Bait Glue may crystallize and is characterized possibly temporarily unusable. When heated to room temperature crystallized products they are again fully usable.
Unopened the Soft Bait Glue is several years, if stored under recommended storage temperature.
Furthermore, the Soft Bait Glue is absolutely perfect for gluing our fishingglue STINGER MAGNETS and fishingglue GLASS RATTLES to most rubber lures*. The Soft Bai Glue glues the fishingglue STINGER MAGNETS or the fishingglue GLASS RATTLES together with the rubber lure extremely firmly.
* Not suitable for all softener-free soft baits from Moby made from Non Toxic Material, Z-Man soft baits from ElaZtech or baits made from similar material. Also not suitable for all rubber baits from the company "PROFIBLINKER" and "LIEBLINGSKÖDER".
application
Clean the place to be allocated necessary back up and dry. provide a sufficient amount of adhesive on both sides and completely to the adherend-sectional area, in the crack or the other to be repaired, allow to dry for 5 - 10 seconds and then squeeze firmly. Now even smaller corrections are possible. Remove the possibly excess / leaving adhesive residue immediately coarsely. The soft bait store and allow to dry for at least 10 minutes to rest. Then, the bonded body is normal to heavy load. Basically, the longer the drying time more stable connection. Therefore, our recommendation is subject to high loads and severe adhesions / large soft baits at least 1 hour (z. B.> 16 cm) to maintain. When adhesions in the area of the jig head or the hook channel remove the jig head before bonding and at least 1 hour (preferably longer) wait until the use of the soft bait.
Avoid at every repair / bonding direct sunlight and drafts! Temperatures below 5 ° C can adversely affect the repair result.
Specification
- Special glue for repairing / for bonding soft plastic baits
- Dimensions 170 x 130 x 90 mm (L x B x H)
- Weight of the article total: approx 720 g
Made in Germany!
Packaging
- 16 packs of Gummifischkleber 12g item no. 999997 in a display box.
Storage / Shelf Life
The warehousing and application- temperature should ideally be 10 - 25°C. Storage at temperatures below 5°C the Soft Bait Glue may crystallize and is characterized possibly temporarily unusable. When heated to room temperature crystallized products they are again fully usable.
Unopened the Soft Bait Glue is several years, if stored under recommended storage temperature.
Video Anwendung Gummifischkleber |
Video Tuning Gummifischkleber |
Hazards for the Soft Bait Glue:
Danger
Hazardous components which must be listed on the label: Butanone
Hazard statements: Highly flammable liquid and vapour. Causes serious eye irritation. May cause drowsiness or dizziness.
Precautionary statements: Keep out of reach of children. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Keep container tightly closed. Wear protective gloves/protective clothing/eye protection/face protection. IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Store in a well-ventilated place. Keep container tightly closed. Dispose of contents/container to in accordance with local and national regulations.
Special labelling of certain mixtures: Repeated exposure may cause skin dryness or cracking.
Other hazards: Vapours may form explosive mixture with air.
Danger
Hazardous components which must be listed on the label: Butanone
Hazard statements: Highly flammable liquid and vapour. Causes serious eye irritation. May cause drowsiness or dizziness.
Precautionary statements: Keep out of reach of children. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Keep container tightly closed. Wear protective gloves/protective clothing/eye protection/face protection. IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Store in a well-ventilated place. Keep container tightly closed. Dispose of contents/container to in accordance with local and national regulations.
Special labelling of certain mixtures: Repeated exposure may cause skin dryness or cracking.
Other hazards: Vapours may form explosive mixture with air.
Safety data sheet
Hersteller/EU Verantwortliche Person/Produktdokumente
Hersteller:
Unternehmensname
Hans-Günther Winkler
Adresse
Ahornweg 11, 85586 Poing, Bayern, DE
E-Mail
info@fishingglue.de
Telefon
081212279007
EU Verantwortliche Person:
Unternehmensname
Hans-Günther Winkler
Adresse
Ahornweg 11, 85586 Poing, Bayern, DE
E-Mail
info@fishingglue.de
Telefon
081212279007
Produktdokumente:
Anleitung Gummifischkleber
Sicherheitsdatenblatt Gummifischkleber
Hersteller:
Unternehmensname
Hans-Günther Winkler
Adresse
Ahornweg 11, 85586 Poing, Bayern, DE
info@fishingglue.de
Telefon
081212279007
EU Verantwortliche Person:
Unternehmensname
Hans-Günther Winkler
Adresse
Ahornweg 11, 85586 Poing, Bayern, DE
info@fishingglue.de
Telefon
081212279007
Produktdokumente:
Anleitung Gummifischkleber
Sicherheitsdatenblatt Gummifischkleber
